An absolute dream in the low end, the ORIGIN is a super comfortable, light, forgiving, and accessible all-round wing that feels effortless to ride. It allows the easiest take-offs with minimal pumping and with just enough speed to get going. Beginners and experts alike will appreciate its very efficient and intuitive pumping thanks to its flexibility, as well as its super smooth take-offs. This wing is the softest and most comfortable one of our range.

The ORIGIN also offers intuitive power delivery with barely any adjustments needed once in the air. Simply sheet in and let it make you foil away. Its controlled speed allows you to ride without excessive effort or fatigue.

The ORIGIN is for everyone. It is the ideal choice for riders looking to spend long hours on the water, those who ride larger foils and boards and need easy power for planing starts, or for beginners looking for a high-quality wing with great potential to evolve and progress.

Its lightness truly sets it apart from our other wings, making it also perfect to freefly in the low end. The ORIGIN is a great addition to your quiver as a light-wind wing.

 

Design:

The ORIGIN’s design has been optimized to guarantee as much lightness and comfort as possible.

With our staggered seams, the fabric and its seams work better to keep a smooth and efficient profile and to reduce the deformation of the wing’s shape under load. The control of the profile is ideal to guarantee total stability and comfort during the ride.

Small radial cuts are implemented on the wingtips and on the back of the strut to spread tensions. Aligning the fibre exactly along the load paths means that stretch can be controlled to a never-before-seen level on a wing.

Located on the back of the strut, our refined Load Diffuser made of overlapping panels of hard Mylar and Dacron further helps maintaining the profile sleek and efficient, leading to the ultimate stability, performances, and longevity.

The strut and the two central segments of the leading edge on each side of the strut are made of HITEX 158g. This high tenacity polyester offers great resistance to elongation and therefore greater durability and performances. The remaining segments of the leading edge are made of Dacron 150g to guarantee lightness and comfort.

The ORIGIN’s canopy is in TECHNOFORCE™/D2 in 52g, while the thicker TECHNOFORCE™/D2 in 66g is on the trailing edge. These materials are perfectly distributed to account for the different tensions, high pressures, and weight distribution of each area.

The central strut is completely straight, which allows us to better control its deformation and possible twisting, while reducing drag. As a result, the infill is a bit lower and deforms less, and is extended almost all the way to the back.

Combining fantastic stability and effortless maneuverability, the ORIGIN is a versatile wing perfectly suited for rapid progression and endless fun on the water.

SAIL ENGINEERING

Sail engineering is the science of controlling our design and its behaviour while flying. These features have been created with one goal in mind: Mastering the kite's loads to maintain the desired shape for the longest time.

1 – WARP TENSION LINE

Woven fabrics feature a longitudinal 0° yarn (Warp) and a transversal 90° yarn (Weft). Therefore, a fabric has great elongation resistance and strength capacities if you apply tension at 0° or 90° along the yarns. But it will deform and stretch when tension is applied at, let’s say, 45°.

2 – LOAD CONTROL PANELING

When engineering the load control paneling, we make sure that fabrics panels are warp/weft oriented, meaning that the load path runs through the yarns. Fabric and seams are then in the best position to receive tensions and maintain the original kite shape.

3 – STAGGERED SEAMS

Most of the kite’s back lines tension is distributed through the trailing-edge panels and seams. As seams are significantly stiffer than the fabric they join, they tend to strain under loads and therefore deform the profile. The staggered seams break that line of tension by balancing the stiffness between seams and cloth, which helps distribute the load over a wider area and maintain the original shape even under high loads.

4 – FABRIC WEIGHT MANAGEMENT

Our sails feature four different cloth weights, from 52 up to 155gr/m². Sail engineering allows us to control our shape and drive load tensions without using heavy fabrics or bulky designs, therefore we can reduce fabric’s weight and use. It results in a lighter, optimized kite.

HITEX

To meet the specific needs of the development of wings and kites, and to offer a high-performance and durable product without using inaccessible materials, F-ONE has developed HITEX, a new high tenacity polyester. Available in 158g, and exclusively for F-ONE in 178g, this new material is incredibly resistant to elongation and increases the durability of wings and kites. HITEX is an innovative, high tenacity polyester fiber with an enhanced high-quality weaving and coating that increases the fabrics’ resistance. The 178g is a new weight and perfectly matches the needs of the center strut and center of its leading edge. The lighter 158g is used in the leading edge tips. Used throughout the inflatable structure of the wings and kites and designed to handle the high pressures when inflating, HITEX offers performance and resistance. Thanks to extensive Sail Engineering work, the R&D team has placed each weight of HITEX in different areas allowing absolute control of the shape session after session.

ORIGIN LOAD DIFFUSER

Located on the back of the strut, our innovative Load Diffuser made of overlapping panels of hard Mylar and Dacron further helps maintaining the profile sleek and efficient, leading to the ultimate stability, performances, and longevity.

ORIGIN RADIAL TIPS

Small radial cuts are also implemented on the wingtips and on the back of the strut to spread tensions. Aligning the fibre exactly along the load paths means that stretch can be controlled to a never-before-seen level on a wing.

TECHNOFORCE

TEIJIN’s TECHNOFORCE™ is the most reliable high density polyester fabric. Its tear-stopping structure using thin and high tension yarn makes the fabric ultra-durable.

It has a great proven track record of lightness and durability.

REACTOR VALVE

The reactor inflation valve offers a high flow connection that twist locks the pump hose to the kite for an easy and super-fast inflation and deflation at the push of a button.

It provides a high air flow rate between the struts and leading edge.

SWING KEVLAR REINFORCEMENTS

The wingtips are protected with abrasion-resistant Kevlar® fabric reinforcements.

INTERCHANGEABLE WING HANDLES SYSTEM 2025

All our wings are fitted with our interchangeable handle system. Whether you’re looking for a light and comfortable setup with soft handles, a more direct and aggressive ride with hard handles or something in between with our innovative hybrid handles, we’ve got you covered.